Bradford White® Defender Safety System® Gas Water Heater, 31000 Btu/hr Heating, Liquid Propane Fuel, 1/2 in Gas Connection, 30 gal Tank, Piezo Ignition, Atmospheric Vent, 3 x 4 in Vent, 34 gph Recovery Rate, 0.6, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 18 in Dia x 21-1/2 in D x 59-15/16 in H, Domestic
Bradford White Defender Safety System®, 30 Gallon Tall Residential Gas (Liquid Propane) Atmospheric Vent Water Heater. 6-Year Tank Warranty, 31,000 BTU/Hr.
AHRI Certified|ANSI Z21.10.1-2014|ASHRAE 90.1b|CEC Listed|CSA 4.1-2014|CSA International (Formerly AGA/CGA)|CSA LLC - Low Lead Compliant|Massachusetts Approved|NAECA Compliant|NSF 372|PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Dimensions
18 in Dia x 21-1/2 in D x 59-15/16 in H
Domestic/Import
Domestic
Energy Factor
0.6
Fuel Type
Liquid Propane
Gas Connection
1/2 in
Heating Capacity
31000 Btu/hr
Ignition Type
Piezo
Pressure Rating
150 psi
Recovery Rate
34 gph
Tank Capacity
30 gal
Ultra Low NOx
No
Vent Size
3 x 4 in
Vent Type
Atmospheric
Water Connection
3/4 in NPT
Brand
Bradford White®
Country of Origin
US
Warranty
6 Years Limited on Tank/6 Years Limited on Component Parts
Bradford White® ICON System™: Intelligent gas control with proven millivolt powered technology and built-in piezo igniter off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricityEnhanced performance: Proprietary algorithms provide enhanced first hour delivery rating and tighter temperature differentialsAdvanced temperature control system: Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levelsIntelligent diagnostics: An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshootingPilot on indication: Flashing green led provides positive indication that pilot is onSeparate immersed thermowell: High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valveAdvanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heaterResettable thermal switch: Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flowMaintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditionsSight window: Offers a view into the combustion chamber to observe the operation of the pilot and burnerFactory installed Hydrojet® total performance system: Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tankVitraglas® liningInsulation system: Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidityPedestal baseWater connections: 3/4 in NPT factory installed true dielectric fittingsFactory installed heat trapsProtective magnesium anode rod3 x 4 in "Snap Lock" draft diverter: Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverterLow restriction brass drain valve: Durable tamper proof designFVIR defender safety System®